At Scotchman, we're proud to be an
American manufacturer!
Print Product SpecsCPO 275 PKPD
| Semi-Automatic Cycle |
| Pneumatic Power Down Feed with Electric Controls |
| Power Double Self-Centering Vise Assures Burr-Free Cuts |
| Air-operated clamp for material vise |
| Emergency Stop Button |
| Miter Capabilities 45 degrees Left and 45 degrees Right |
| Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right |
| Capable of Slotting |
| Two Cutting Speeds |
| Hardened and Ground Worm and Wheel Gear Box |
| Worm Wheel of Top Quality Bronze |
| Chip Drawer |
| 7 Gallon Coolant Tank with Pump |
| One 10" Diameter (250 mm) HSS Blade |
| One Blade Wrench |
| One Gallon Concentrated Coolant |
| 230 or 460 Volt/3 Phase Electrics (must specify voltage) |
| Warranty: Three Years on Parts |
| Made in USA |
| Cutting Speeds | Must Specify when Ordering | |
| LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn)
30 rpm / 60 rpm |
Motor rate:
2 hp |
| HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT (High Turn)
60 rpm / 120 rpm |
Motor rate:
1.5 hp |
| SS(Single Speed) designed for 220v 1ph applications | SS (Single Speed)
60 rpm |
Motor rate:
2 hp |
| TUBING
Round Square Rectangle SOLID Round Square |
90 Deg
3-3/8" (86 mm) 3" x 3" (76 x 76 mm) 3" x 2-3/8" (76 x 60 mm) 90 Deg 1-1/2"(38 mm) 1-1/2" x 1-1/2" (38 x 38 mm) |
45 Deg.
2"(51 mm) 2" x 2" (51 x 51 mm) 3" x 2" (76 x 51 mm) 45 Deg. 1" (25 mm) 1" x 1" (25 x 25 mm) |
| Factory Wired | Specify
208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz 220 1 ph (SS Model Only) |
|
| Maximum Diameter Blade | 10-3/4" | 275 mm |
| Arbor Bore | 1-1/4" | 32 mm |
| Pin Spacing | 2/8/45 | |
| Width | 21-7/8" | |
| Depth | 43-1/2" | |
| Height not including handle | 53-1/4" | |
| Height from floor to vise | 36-1/8" | |
| Shipping Weight | 670 lbs. | (303 kg) |
) |
BLADES & SHARPENINGCold Saw Blades |
) |
Square Tube Jaws |
) |
Special Clamping Fixture |
) |
Laser Saw GuideThis industrial grade laser light for circular cold saws minimizes set-up time and ensures the material is being sawed to the correct length and squareness by helping the operator see the line marked for cutting. (Watch Movie) |
) |
60" or 120" Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc SystemDesigned for quick, easy and accurate length setting. Available left to right or right to left material feed. |
) |
10' & 20' Material Supply Track |
) |
Programmable Stop ~ SGAvailable in 96" SG Programmable Stop System (Supplied w/roller conveyor & designed for either right to left or let to right stop position.)
|
Please Upgrade Your Flash Player
