Print Product SpecsCPO 350

usa icon At Scotchman, we're proud to be an
American manufacturer!

Manual Double Self-Centering Vise Assures Burr-Free Cuts

Miter Capabilities 45 degrees Left and 45 degrees Right

Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right

Operator Controlled Trigger Switch

Capable of Slotting

Two Cutting Speeds

Double Reduction, Hardened and Ground Worm and Wheel Gear Box

Worm Wheel of Top Quality Bronze

Chip Drawer

7 Gallon Coolant Tank with Pump

One 12-1/2" Diameter (315 mm) HSS Blade

One Blade Wrench

One Gallon Concentrated Coolant

230 or 460 Volt/3 Phase Electrics (must specify voltage)

Warranty: Three Years on Parts

Made in USA

Cutting Speeds	Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe	LT (Low Turn) 22 rpm / 44 rpm	Motor rate: 3 hp
HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material	HT (High Turn) 44 rpm / 88 rpm	Motor rate: 2.5 hp
VS (Variable Speed) ~ wired 230/460, 3-ph	VS (Variable Speed) 11 / 177 rpm	Motor Rate: 5 hp
VS (Variable Speed) ~ wired 220, 1-ph	VS (Variable Speed) ~ 11 / 177 rpm	Motor Rate: 5 hp
SS (Single Speed) designed for 220v 1 ph applications	SS (Single Speed) 44 rpm	Motor Rate: 3 hp
TUBING Round Square Rectangle SOLID Round Square	90 Degree 4-1/2" (114 mm) 4-1/4" x 4-1/4" (108 x 108 mm) 5-1/2" x 4" (140 x 102 mm) 90 Degree 2" (51 mm) 2" x 2" (51 x 51 mm)	45 Degree 4" (102 mm) 4" x 4" (102 x 102 mm) 4" x 4" (102 x 102 mm) 45 Degree 1-3/4" (44 mm) 1-3/4" x 1-3/4" (44 x 44 mm)
Factory Wired	Specify 208 3 ph 230 3 ph 460 3 ph 575 volt, 3 ph 60 hz 220 1-ph 60 Hz (SS Model only)
Maximum Diameter Blade	14"	350 mm
Arbor Bore	1-9/16"	40 mm
Pin Spacing	4/12/64
Width	21-7/8"
Depth	43-1/2"
Height not including handle	56-1/4"
Height from floor to vise	37-7/16"
Shipping Weight	660 lbs.	(299 kg)

	BLADES & SHARPENING Cold Saw Blades Scotchman offers a complete selection of saw blades in stock for immediate delivery. Cold Saw Blade Sharpening Scotchman offers a fast, high-quality blade sharpening service and will grind blades with special tooth number.
	Variable Speed Control Recommended for cutting multiple shapes, sizes and thicknesses. RPM can be fine tuned to achieve optimum blade speed for each application, and increase blade life.
	Square Tube Jaws
	Special Clamping Fixture
	Miter Locking Device STANDARD FEATURE (not available for 275 PK or 275 PKPD models)
	Laser Saw Guide This industrial grade laser light for circular cold saws minimizes set-up time and ensures the material is being sawed to the correct length and squareness by helping the operator see the line marked for cutting. (Watch Movie)
	60" or 120" Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc System Designed for quick, easy and accurate length setting. Available left to right or right to left material feed.
	10' & 20' Material Supply Track
	Programmable Stop ~ SG Available in 96" SG Programmable Stop System (Supplied w/roller conveyor & designed for either right to left or let to right stop position.) or Available in 144" SG Programmable Stop System (Supplied w/roller conveyor & designed for either right to left or left to right stop position.)