At Scotchman, we're proud to be an
American manufacturer!
Print Product SpecsDO 150/240-24M
| Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity |
| 150 Ton Punch Station (1-7/8" in 1") |
| Keyed Punch Ram for Safety |
| 12" Throat Depth |
| Punch Gauging Table with Fence and Scale |
| Die Holders: 2", 2-1/2", and 3" |
| Punch Nut with Wrench |
| Adjustable Swing-Away Stripper |
| One Round Punch & Die: Max. Dia. 1-1/4" |
| Punch Jog Control |
| Two Electric Remote Foot Pedals |
| Two Adjustable Electric Stroke Controls with Scale |
| Two 2-Stage Hydraulic Pumps |
| Two Valves |
| Angle Shear Capacity 6" x 6" x 1/2" at 90° |
| Rectangle Notcher 3" x 5-3/4" x 1/2" |
| Notcher Table with Guides |
| 240 Ton, 24" Flat Bar Shear with Sabre Blade (1" x 14", 3/4" x 24") |
| Shear Table with Miter Fence |
| Tool Table Work Area |
| Slug Receptacles |
| Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations |
| 230/460 Volt /3 Phase Electrics (must specify voltage) |
| All Guards Necessary to Comply with ANSI B 11-5 Standards |
| Forklift Accommodations |
| Warranty: Three Years |
| Made in USA |
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 150 ton
1-1/2" in 1-1/4" 1-7/8" in 1" 2-1/2" in 3/4" |
136 mt
38 in 32 mm 48 in 25 mm 63 in 19 mm |
| Special Tooling | 4" Max. Dia. | 100 mm Max. Dia. |
| Throat Depth | 12" | 300 mm |
| Flat Bar Shear
(Sabre Blade - Std) |
240 ton, 24" Length
1" x 14" 3/4" x 24" |
600 mm
25 x 355 mm 19 x 610 mm |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 x 150 x 12 mm |
| Angle Shear 45°
with Bar Shear |
3" x 3" x 3/8"
4" x 4" x 1/2" |
75 x 75 x 10 mm
100 x 100 x 12 mm |
| Brake 12" | 90 ton | 81.6 mt |
| Brake 24" | 70 ton | 63.5 mt |
| Open End Brake | Max. 1/4" x 5"
Flat or Angle Iron |
6 mm x 125 mm |
| Pipe Notcher Housing Schedule 40 I.D. | 3/4"
1" 1-1/4" 1-1/2" 2" |
19 mm
25 mm 32 mm 38 mm 50 mm |
| 90° V-Notcher | 6" x 6" x 5/16" | 150 x 150 x 8 mm |
| Rectangle Notcher
V-Notch Notching in Leg of Channel |
3" x 5-3/4" x 1/2"
3" x 3" x 1/2" 6" to 10" |
75 x 145 x 12 mm
75 x 75 x 12 mm 150 mm to 250 mm |
| Channel Shear | 2" to 6" Adj. | 50 mm to 150 mm |
| Strut Shear | Samples Required | |
| Rod Shear
Round Rod (Max.) Square Rod (Max.) |
1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav. |
6 mm to 32 mm
6 mm to 25 mm |
| Square Tube Shear | 1/2" to 2"
12 ga. |
12 to 50 mm
2.75 mm |
| Picket Tool | 1/2"
3/4" 1" 16 ga. |
12 mm
19 mm 25 mm 1.6 mm |
| Offset Die Holder | Max. 40 ton | Max. 36 mt |
| Strokes Per Minute in Light Material | 1/4" Stroke [Punch Station] | 52 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] | 17.5 spm |
| Hydraulics | 3,500/3,000 psi | 241/207 bar |
| Motors | 10 hp 3 ph
230/460 208/380/575 |
7.46 kW |
| Motors Optional | 10 hp 1 ph
230v |
7.46 kW |
| Dimensions | W-34"
L-77.25" H-74.25" |
W-119 cm
L-174 cm H-187 cm |
| Weight | 6,400 lbs | 2,910 kg |
) |
Mandrel Tube Punch
|
) |
Flatten and Trim Tube Punch(custom tooling)
|
) |
Round Tube Punch(custom tooling)
|
) |
Brake Table with Scale and Squaring Arm12" and 24" Brakes
|
) |
12" & 24" Brake(Watch Movie) |
) |
Open End Brake(Watch Movie) |
) |
Pipe Notcher(Watch Movie) |
) |
90° V-Notcher(Watch Movie) |
) |
Rectangle Notcher(Watch Movie) |
) |
Channel Shear(Watch Movie) |
) |
Picket Tool(Watch Movie) |
) |
Tube Shear(Watch Movie) |
) |
Urethane Stripper(Watch Movie) |
) |
6" x 6" Die Holder(Watch Movie) |
) |
Strut Shear(Watch Movie) |
) |
Rod Shear(Watch Movie) |
) |
Offset Die Holder(Watch Movie) |
) |
Punch Slug Receptacle |
) |
Unequal Leg Angle Blades |
) |
Hydraulic Hold Down(Watch Movie) |
) |
48" Back Gauge(Watch Movie) |
) |
Laser Light(Watch Movie) |
) |
Punch Table Extension |
) |
Tool Table Extension with Punch & Die Storage |
) |
Multi-Loc Punch Gauging Table 36" and 85" Extensions Available(Watch Movie) |
) |
24" x 5' Conveyor with Angle Iron Support attached to DO70/110 |
Please Upgrade Your Flash Player
