At Scotchman, we're proud to be an
American manufacturer!
Print Product SpecsDO 8514-20M
| Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity |
| 85 Ton Punch Station (1-1/16" in 1") |
| Keyed Punch Ram for Safety |
| 14" Throat Depth |
| Punch Gauging Table with Fence and Scale |
| Die Holder Complete with 2" Die Insert for #82 Dies |
| Punch Nut with Wrench |
| Adjustable Swing-Away Stripper |
| One Round Punch & Die: Max. Dia. 1-1/4" |
| Punch Jog Control |
| Two Adjustable Electric Stroke Controls with Scale |
| Two Electric Remote Foot Pedals |
| Two 2-Stage Hydraulic Pumps |
| Two Valves |
| 6" x 6" x 1/2" Slug-less Angle Shear |
| Built-In Rectangle Notcher: 2" x 4" x 1/2" can be converted to 3" x 3" V-Notcher 50-Ton Punch Station 6" Open End Brake |
| 20" Flat Bar Shear (1" x 16", 3/4" x 20") |
| Shear Table with Miter Fence |
| Rod Shear: 1/2", 3/4", 1", 1-1/2" Round and 1-1/2" Square |
| Slug Receptacles |
| Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations |
| 230 or 460 Volt /3 ph Electrics (must specify voltage) |
| All Guards Necesary to Comply with ANSI B 11-5 Standards |
| Forklift Accommodations |
| Warranty: Three Years |
| Made in USA |
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 85 ton
1-1/16" in 1" |
77 mt
27 mm in 25 mm |
| Special Tooling | 4" Max. Dia. | 200 mm Max. |
| Throat Depth | 14" | 350 mm |
| Flat Bar Shear | 20" Length
1" x 16" 3/4" x 20" |
500 mm
25 mm x 400 mm 19 mm x 500 mm |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 mm x 150 mm x 13 mm |
| (45° with Bar Shear) | 4" x 4" x 1/2" | 100 mm x 100 mm x 13 mm |
| Brake 12" | 85 ton | 77 mt |
| Brake 24" | 85 ton | 77 mt |
| Open End Brake | 5" x 5/8" | 125 mm x 16 mm |
| Pipe Notcher
Schedule 40 I.D. |
3/4"
1" 1-1/4" 1-1/2" 2" |
19 mm
25 mm 32 mm 38 mm 50 mm |
| 90° V. Notcher
(Punch Station) |
6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm |
| Rectangle Notcher | 2" x 4" x 1/2" | 50 mm x 100 mm x 13 mm |
| 90° V. Notcher (Notcher Station) | 3" x 3" x 1/2" | 75 mm x 75 mm x 12 mm |
| Punch Attachment
(Notcher Station) Throat Depth w/Punch Attachment |
50 ton
1-1/4" in 1/2" 4-7/16" |
32 mm in 12 mm |
| Channel Shear | 2" to 6" | 50 mm to 150 mm |
| Strut Shear | Samples Required | |
| Rod Shear
Round Rod (Max.) Square Rod (Max.) |
1/2" 3/4" 1" 1-1/2" 1-1/2" |
13 mm 19 mm 25 mm 38 mm 38 mm |
| Square Tube Shear | 1/2"
3/4" 1" 16 gauge |
13 mm
19 mm 25 mm 1.6 mm |
| Offset Die Holder | Max. 40 ton | 36 mt |
| Strokes per Minute in Light Material | 1/4" Stroke [Punch Station] | 48 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] | 20 spm |
| Hydraulics | 3,200/3,800 psi | 220/260 bar |
| Motors Standard | 10 hp 3 ph
230/460 208/380/575 |
7.46 kW |
| Motor Optional | 10 hp 1 ph
230v |
7.46 kW |
| Dimensions | W-30"
L-70" H-77" |
W-750 cm
L-1500 cm H-1925 cm |
| Weight | 5,400 lbs | 2455 kg |
) |
Mandrel Tube Punch
|
) |
Flatten and Trim Tube Punch(custom tooling)
|
) |
Round Tube Punch(custom tooling)
|
) |
Brake Table with Scale and Squaring Arm12" and 24" Brakes
|
) |
12" & 24" Brake(Watch Movie) |
) |
Open End Brake(Watch Movie) |
) |
Pipe Notcher(Watch Movie) |
) |
90 Degree V-Notcher(Watch Movie) |
) |
Channel Shear Blades |
) |
Picket Tool(Watch Movie) |
) |
Tube Shear(Watch Movie) |
) |
Urethane Stripper(Watch Movie) |
) |
Open End Brake for Notcher End(Watch Movie) |
) |
6" x 6" Die Holder(Watch Movie) |
) |
Strut Shear(Watch Movie) |
) |
Offset Die Holder(Watch Movie) |
) |
48" Back Gauge(Watch Movie) |
) |
Optional Punch for Notcher End |
) |
Punch Table Extension |
) |
Multi-Loc Punch Gauging Table 36" & 85" Extensions(Watch Movie) |
) |
24" x 5' Conveyor with Angle Iron Support attached to FI8510/20M |
Please Upgrade Your Flash Player
