At Scotchman, we're proud to be an
American manufacturer!
Print Product SpecsDO 95/140-24M
| Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity |
| 95 Ton Punch Station (1-3/16" in 1") |
| Keyed Punch Ram for Safety |
| 9" Throat Depth |
| Punch Gauging Table with Fence and Scale |
| Die Holder Complete with 2" Die Insert |
| Punch Nut with Wrench |
| Adjustable Swing-Away Stripper |
| One Round Punch & Die: Max. Dia. 1-1/4" |
| Punch Jog Control |
| Two Adjustable Electric Stroke Controls with Scale |
| Two Electric Remote Foot Pedals |
| Two 2-Stage Hydraulic Pumps |
| Two Valves |
| Angle Shear Capacity 6" x 6" x 1/2" at 90° |
| Rectangle Notcher 3" x 4" x 1/2" |
| Notcher Table with Guides |
| 140 Ton, 24" Flat Bar Shear with Sabre Blade (1" x 8", 3/8" x 24") |
| Shear Table with Miter Fence |
| Tool Table Work Area |
| Slug Receptacles |
| Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations |
| 230/460 Volt /3 Phase Electrics (must specify voltage) |
| All Guards Necessary to Comply with ANSI B 11-5 Standards |
| Forklift Accommodations |
| Warranty: Three Years |
| Made in USA |
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 95 ton
1-3/16" in 1" |
86 mt
27 mm in 25 mm |
| Special Tooling | 4" Max. Dia. | 100 mm through 5.5 mm |
| Throat Depth | 9" | 225 mm |
| Flat Bar Shear
(sabre blade-std.) |
140 ton
24" Length 1" x 8" 3/4" x 12" 1/2" x 16" 3/8" x 24" |
127 mt
609 mm 25 mm x 203 mm 18 mm x 304 mm 12 mm x 406 mm 10 mm x 609 mm |
| Angle Shear 90°
Angle Shear 45° (with Bar Shear) |
6" x 6" x 1/2"
3" x 3" x 3/8" 4" x 4" x 1/2" |
150 mm x 150 mm x 12 mm
75 mm x 75 mm x 10 mm 100 mm x 100 mm x 12 mm |
| Brake 12"
Brake 24" |
80 ton
55 ton |
72.50 mt
50 mt |
| Open End Brake | Max. 1/4" x 5"
Flat or Angle Iron |
6 mm x 125 mm |
| Pipe Notcher
Schedule 40 |
3/4"
1" 1-1/4" 1-1/2 2" |
19 mm
25 mm 32 mm 38 mm 50 mm |
| 90° V-Notcher | 6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm |
| Rectangle Notcher | 3" x 5" x 3/8"
3" x 4" x 1/2" |
75 mm x 125 mm x 10 mm
75 mm x 100 mm x 12 mm |
| V-Notch | 3" x 3" x 3/8" | 75 mm x 75 mm x 10 mm |
| Notching in Leg of Channel | 6" to 10" | 150 mm to 250 mm |
| Channel Shear | 2" to 6" adj. | 50 mm to 150 mm adj. |
| Rod Shear
Round Rod (Max.) Square Rod (Max.) |
1/4" to 1-1/4", 9 Cavity 1/4" to 1", 1 Cavity |
6 mm to 32 mm 6 mm to 25 mm |
| Strut Shear | Samples Required | |
| Square Tube Shear | 1/2" to 2"
12 gauge |
12 mm to 55 mm
2.75 mm |
| Picket Tool | 1/2"
3/4" 1" 16 gauge |
12 mm
19 mm 25 mm 1.6 mm |
| Offset Die Holder | Max. 40 ton | Max. 36 mt |
| Strokes per minute in light material | 1/4" stroke [Punch Station] | 25 spm |
| Strokes per minute in heavy material | 3/4" stroke [Punch Station] | 17 spm |
| Hydraulics | 3,500 psi | 241 bar |
| Motor Standard | 10 hp 3 ph
230/460 208/380/575 |
7.46 kW |
| Motor Optional | 10 hp 1 ph
220v |
7.46 kW |
| Dimensions | W-30"
L-65" H-72 1/8" |
76 cm
165 cm 183 cm |
| Weight | 4,000 lbs. | 1,814 kg |
) |
Mandrel Tube Punch
|
) |
Flatten and Trim Tube Punch(custom tooling)
|
) |
Round Tube Punch(custom tooling)
|
) |
Brake Table with Scale and Squaring Arm12" and 24" Brakes
|
) |
12" & 24" Brake(Watch Movie) |
) |
Open End Brake(Watch Movie) |
) |
Pipe Notcher(Watch Movie) |
) |
90° V-Notcher(Watch Movie) |
) |
Rectangle Notcher(Watch Movie) |
) |
Channel Shear(Watch Movie) |
) |
Picket Tool(Watch Movie) |
) |
Tube Shear(Watch Movie) |
) |
Urethane Stripper(Watch Movie) |
) |
6" x 6" Die Holder(Watch Movie) |
) |
Strut Shear(Watch Movie) |
) |
Rod Shear(Watch Movie) |
) |
Offset Die Holder(Watch Movie) |
) |
Punch Slug Receptacle |
) |
Unequal Leg Angle Blades |
) |
48" Back Gauge(Watch Movie) |
) |
Laser Light(Watch Movie) |
) |
Punch Table Extension |
) |
Tool Table Extension with Punch & Die Storage |
) |
Multi-Loc Punch Gauging Table 36" and 85" Extensions Available(Watch Movie) |
) |
24" x 5' Conveyor with Angle Iron Support attached to DO70/110 |
Please Upgrade Your Flash Player
