At Scotchman, we're proud to be an
American manufacturer!
Print Product SpecsFI 8510-20M
| 85 Ton Punch Station (1-1/16" in 1") |
| Keyed Punch Ram for Safety |
| 10" Throat Depth |
| Punch Gauging Tabe with Fence & Scale |
| Die Holder Complete with 2" Die Insert |
| Punch Nut with Wrench |
| Adjustable Swing-Away Stripper |
| One Round Punch & Die: Max. Dia. 1-1/4" |
| Punch Jog Control |
| Adjustable Electric Stroke Control with Scale |
| Electric Remote Foot Pedal |
| 6" x 6" x 1/2" Slug-less Angle Shear |
| 20" Flat Bar Shear (1" x 12", 3/4" x 20") |
| Shear Table with Miter Fence |
| Rod Shear Capacity 1-1/2" Round, 1-1/4" Square |
| Rectangle Notcher Capacity 3" x 5" x 1/2" |
| Notcher Table with Scale and Guide |
| Two-Stage Hydraulic Pump |
| Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations |
| 230/460 Volt /3 Phase Electrics (must specify voltage) |
| All Guards Necessary to Comply with ANSI B 11-5 Standards |
| Forklift Accommodations |
| Warranty: Three Years |
| Made in USA |
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 85 ton
1-1/16" in 1" |
77 mt
27 mm in 25 mm |
| Special Tooling | 4" Max. Dia. | 100 mm Max. Dia. |
| Throat Depth | 10" | 250 mm |
| Flat Bar Shear | 20" Length
1" x 12" 3/4" x 20" |
500 mm
25 mm x 300 mm 19 mm x 500 mm |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 mm x 150 mm x 12 mm |
| 45° with Bar Shear | 4" x 4" x 1/2" | 100 mm x 100 mm x 12 mm |
| Brake 12" | 85 ton | 77 mt |
| Brake 24" | 85 ton | 77 mt |
| Open End Brake | Max. 1/4" x 5"
Flat or Angle Iron |
6 mm x 125 mm |
| Pipe Notcher
Schedule 40 I.D. |
3/4"
1" 1-1/4" 1-1/2" 2" |
19 mm
25 mm 32 mm 38 mm 50 mm |
| 90° V-Notcher | 6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm |
| Rectangle Notcher
90° V. Notch |
3" x 5" x 1/2"
3" x 3" x 1/2" |
75 mm x 125 mm x 12 mm
75 mm x 75 mm x 12 mm |
| Channel Shear | 2" to 6" Adj. | 50 mm to 150 mm Adj. |
| Strut Shear | Samples Required | |
| Rod Shear
Round Rod Square Rod |
1-1/2" 1-1/4" |
38 mm 32 mm |
| Square Tube Shear | 1/2" to 2"
12 ga. |
12 mm to 50 mm
2.75 mm |
| Picket Tool | 1/2"
3/4" 1" 16 gauge |
12 mm
19 mm 25 mm 1.6 mm |
| Offset Die Holder | Max. 40 ton | Max. 36 mt |
| Strokes Per Minute in Light Material | 1/4" Stroke [Punch Station] | 35 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] | 14 spm |
| Hydraulics | 2,600 psi | 183 bar |
| Motors Standard | 5 hp 3 ph
230/460 208/380/575 |
3.76 kW |
| Motors Optional | 5 hp 1 ph
230v |
3.76 kW |
| Dimensions | W-30"
L-67" H-77" |
W-76 cm
L-168 cm H-195 cm |
| Weight | 4,200 lbs. | 1,910 kg |
) |
Mandrel Tube Punch
|
) |
Flatten and Trim Tube Punch(custom tooling)
|
) |
Brake Table with Scale and Squaring Arm12" and 24" Brakes
|
) |
12" & 24" Brake(Watch Movie) |
) |
Pipe Notcher(Watch Movie) |
) |
90 Degree V-Notcher(Watch Movie) |
) |
Picket Tool(Watch Movie) |
) |
Tube Shear(Watch Movie) |
) |
Urethane Stripper(Watch Movie) |
) |
6" x 6" Die Holder(Watch Movie) |
) |
Strut Shear(Watch Movie) |
) |
Offset Die Holder(Watch Movie) |
) |
Hydraulic Hold Down(Watch Movie) |
) |
48" Back Gauge(Watch Movie) |
) |
Punch Slug Receptacle |
) |
Punch Table Extension |
) |
Multi-Loc Punch Gauging Table 36" & 85" Extensions(Watch Movie) |
) |
24" x 5' Conveyor with Angle Iron Support attached to FI8510/20M |
Please Upgrade Your Flash Player
