The Multi-Loc Stop System makes setting up your production runs faster. It is as easy as picking up the stainless steel stop and pressing it down at the dimension you want.
The Multi-Loc Stop System allows you to set stops at various lengths to enable you to maximize your raw stock without changing your set-up each time. These Multi-Loc versions of the AMS Gauging Systems allow you to place multiple stops on the rail as close as 1" apart on the Standard System, and 1-1/2" apart on the Heavy Duty System. Three stops come with each assembly and either system is available in Left-Hand & Right-Hand models. Additional Multi-Loc Stops are available.
To operate, simply set the stops to your cut list dimensions. Slide the material past the stops you do not want to use, right to the desired setting. Press the material against the fence and the flippers on the stops not being used will move away.
Multi-Loc Stop Systems are available in 1/16” increments and in standard lengths of 5’, 10’, 15’, 20’, and 25’. Longer lengths can be achieved by joining rails together.