At Scotchman, we're proud to be an
American manufacturer!
Print Product SpecsSemi-Automatic Programmable Stop Systems
The TS System can be installed either as a "go to" stop or as a semi-automatic push feed system designed with a 32mm steel reinforced mesh belt capable of pushing up to 120 pounds. It is designed to feed left to right or right to left and is available from 4' to 30' lengths.
The TT System is the big brother of the TS System, but is designed with a 75mm steel reinforced cog belt that will push up to 600 pounds when mounted with a roller conveyor.
The TR System has the same capacity as the TT but uses a rack and pinion drive and has the ability to add a pneumatic flip-away stop and external brakes for extra holding power.
The TS-HD2 System is design with a rack and pinion drive system that can push up to 1,400 pounds when mounted with roller conveyor.
| Multi offset allows for multiple tool positions |
| Full Diagnostic Suite |
| Input-Feet, Inches, Fractions, Decimal and Metric |
| Can be Mounted Left to Right or Right to Left |
| Can be used as a Feeder or Stop |
| Eliminates Wasted Material and Time from Incorrectly Punched Holes |
| Set Point Mode |
| Electronic Zero-point Calibration |
| Multi-lingual |
| Increment Function |
| Pattern Mode |
| Programmable |
| Warranty: One Year |
| Made in the U.S.A. |
| Working lengths available: | 4', 6', 8', 10', 12', 16', 20', 24', & 30' | |
| Power Requirements: | 120 Volt, 15 Amps | |
| Frequency | 50/60 HZ | |
| Motor Type | DC Servo with Optical Encoder | |
| Drive Type | Steel Reinforced Belt Drive | |
| Drive Speed | Adjustable 1" to 25" per Second |
)
