| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 120 ton
1-1/2" in 1" | 108 mt
38 mm in 25 mm |
| Special Tooling | 4" Max. Dia. | 100 Max. Dia. |
| Throat Depth | 12" | 300 mm |
| Flat Bar Shear | 24" Length
1" x 12"
3/4" x 20"
1/2" x 24"
| 600 mm
25 mm x 300 mm
18 mm x 500 mm
12 mm x 600 mm |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 mm x 150 mm x 12 mm |
Angle Shear 45°
(with Bar Shear) | 3" x 3" x 3/8"
4" x 4" x 1/2" | 75 mm x 75 mm x 10 mm
100 mm x 100 mm x12 mm |
| Brake 12" | 83 ton | 75 mt |
| Brake 24" | 65 ton | 59 mt |
| Open End Brake | Max. 1/4" x 6"
Flat or Angle Iron | 6 mm x 150 mm
|
| Pipe Notcher Schedule 40 I.D. | 3/4"
1"
1-1/4"
1-1/2"
2" | 19 mm
25 mm
32 mm
38 mm
50 mm
|
| Rectangle Notcher | 2" x 2-1/2" x 3/8" | 50 mm x 65 mm x 10 mm |
| 90° V. Notcher | 6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm |
| Channel Shear | 2" to 6" Adj. | 50 mm to 150 mm Adj. |
Rod Shear
Round Rod
Square Rod |
1/4" to 1-1/4",
9 Cav.
1/4" to 1",
1 Cav. |
6 mm to 32 mm
6 mm to 25 mm |
| Square Tube Shear | 1/2" to 2"
12 ga. | 12 mm to 50 mm
2.75 mm
|
| Picket Tool | 1/2"
3/4"
1"
16 ga. | 13 mm
19 mm
25 mm
1.6 mm |
| Offset Die Holder | Max. 40 ton | Max. 36 mt |
| Strokes Per Minute in Light Material | 1/4" Stroke [Punch Station] | 37 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] | 25 spm |
| Hydraulics | 2,600 psi | 183 bar |
| Motors Standard | 5 hp 3 ph
230/460
208/380/575 | 3.73 kW
|
| Motor Optional | 5 hp 1 ph
230v | 3.73 kW
|
| Dimensions | W-28"
L-77"
H-73" | W-71 cm
L-196 cm
H-185 cm |
| Weight | 5,200 lbs. | 2,360 kg |
