| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 85 ton
1-1/16" in 1" | 77 mt
27 mm in 25 mm |
| Special Tooling | 4" Max. Dia. | 100 mm Max. Dia. |
| Throat Depth | 10" | 250 mm |
Flat Bar Shear
| 20" Length
1" x 12"
3/4" x 20" | 500 mm
25 mm x 300 mm
19 mm x 500 mm |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 mm x 150 mm x 12 mm |
| Angle Shear 45° | 4" x 4" x 1/2" | 100 mm x 100 mm x 12 mm |
| Brake 12" | 85 ton | 77 mt |
| Brake 24" | 85 ton | 77 mt |
| Open End Brake | Max. 1/4" x 6"
Flat or Angle Iron | 6 mm x 150 mm
|
Pipe Notcher Schedule 40 I.D.
| 3/4"
1"
1-1/4"
1-1/2"
2" | 19 mm
25 mm
32 mm
38 mm
50 mm |
| 90° V-Notcher | 6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm |
| Rectangle Notcher
90° V. Notch | 3" x 5" x 1/2"
3" x 3" x 1/2" | 75 mm x 125 mm x 12 mm
75 mm x 75 mm x 12 mm |
| Channel Shear | 2" to 6" Adj. | 50 mm to 150 mm Adj. |
Rod Shear
Round Rod
Square Rod |
1-1/2"
1-1/4" |
38 mm
32 mm |
| Square Tube Shear | 1/2" to 2"
12 ga. | 12 mm to 50 mm
2.75 mm
|
| Picket Tool | 1/2"
3/4"
1"
16 gauge | 12 mm
19 mm
25 mm
1.6 mm |
| Offset Die Holder | Max. 40 ton | Max. 36 mt |
| Strokes Per Minute in Light Material | 1/4" Stroke [Punch Station] | 35 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] | 14 spm |
| Hydraulics | 2,600 psi | 183 bar |
Motors Standard
| 5 hp 3 ph
230/460
208/380/575 | 3.76 kW
|
Motors Optional
| 5 hp 1 ph
230v | 3.76 kW
|
| Dimensions | W-30"
L-67"
H-77" | W-76 cm
L-168 cm
H-195 cm |
| Weight | 4,200 lbs. | 1,910 kg |
