DO 150/240-24M

STANDARD FEATURES

  • Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
  • 150 Ton Punch Station (1-7/8" in 1")
  • Keyed Punch Ram for Safety
  • 12" Throat Depth
  • Punch Gauging Table with Fence and Scale
  • Die Holders: 2", 2-1/2", and 3"
  • Punch Nut with Wrench
  • Adjustable Swing-Away Stripper
  • One Round Punch & Die: Max. Dia. 1-1/4"
  • Punch Jog Control
  • Two Electric Remote Foot Pedals
  • Two Adjustable Electric Stroke Controls with Scale
  • Two 2-Stage Hydraulic Pumps
  • Two Valves
  • Angle Shear Capacity 6" x 6" x 1/2" at 90°
  • Rectangle Notcher 3" x 5-3/4" x 1/2"
  • Notcher Table with Guides
  • 240 Ton, 24" Flat Bar Shear with Sabre Blade (1" x 14", 3/4" x 24")
  • Shear Table with Miter Fence
  • Tool Table Work Area
  • Slug Receptacles
  • Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
  • 230/460 Volt /3 Phase Electrics (must specify voltage)
  • All Guards Necessary to Comply with
    ANSI B 11-5 Standards
  • Forklift Accommodations
  • Warranty: Three Years
  • Made in USA

CAPACITIES & SPECIFICATIONS

Rated on:65,000 PSI TensileA 36 Mild Steel
Punching Capacity



150 ton
1-1/2" in 1-1/4"
1-7/8" in 1"
2-1/2" in 3/4"		136 mt
38 in 32 mm
48 in 25 mm
63 in 19 mm
Special Tooling4" Max. Dia.100 mm Max. Dia.
Throat Depth12"300 mm
Flat Bar Shear
(Sabre Blade - Std)

240 ton, 24" Length
1" x 14"
3/4" x 24"		600 mm
25 x 355 mm
19 x 610 mm
Angle Shear 90° 6" x 6" x 1/2"150 x 150 x 12 mm
Angle Shear 45°
with Bar Shear		3" x 3" x 3/8"
4" x 4" x 1/2"		75 x 75 x 10 mm
100 x 100 x 12 mm
Brake 12"75 ton55 mt
Brake 24"55 ton40 mt
Open End BrakeMax. 1/4" x 6"
Flat or Angle Iron		6 mm x 150 mm
Pipe Notcher Housing Schedule 40 I.D.
3/4"
1"
1-1/4"
1-1/2"
2" 		19 mm
25 mm
32 mm
38 mm
50 mm
90° V. Notcher6" x 6" x 5/16"150 x 150 x 8 mm

Rectangle

V.Notch

Notching in Leg of
Channel 		3" x 5-3/4" x 1/2"

3" x 3" x 1/2"

6" to 10"

75 x 145 x 12 mm
75 x 75 x 12 mm

150 mm to 250 mm

Channel Shear2" to 6" Adj.50 mm to 150 mm
Rod Shear
Round Rod
Square Rod
1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav.
6 mm to 32 mm
6 mm to 25 mm
Square Tube Shear
1/2" to 2"
12 ga.		12 to 50 mm
2.75 mm
Picket Tool

1/2"
3/4"
1"
16 ga.		12 mm
19 mm
25 mm
1.6 mm
Offset Die HolderMax. 40 tonMax. 36 mt
Strokes Per Minute in Light Material1/4" Stroke [Punch Station]20 spm
Strokes Per Minute in Heavy Material3/4" Stroke [Punch Station]11 spm
Hydraulics 3,500/3,000 psi241/207 bar
Motors

10 hp 3 ph
230/460
208/380/575		7.46 kW

Motors Optional
10 hp 1 ph
230v		7.46 kW
DimensionsW-34"
L-77.25"
H-74.25"		W-119 cm
L-174 cm
H-187 cm
Weight6,400 lbs2,910 kg