DO 135/220-24M

STANDARD FEATURES

  • Dual operator allows for two operators to work at the same time at full capacity
  • 135-ton punch station (1-11/16" in 1")
  • Keyed punch ram for safety
  • Punch gauging table with fence and scale
  • Die holders: 2", 2-1/2", and 3"
  • Punch nut with wrench
  • Adjustable swing-away stripper
  • One round punch & die: max. diameter 1-1/4"
  • Punch jog control
  • Two electric remote foot pedals
  • Two adjustable electric stroke controls with scale
  • Two 2-stage hydraulic pumps
  • Two valves
  • Angle shear capacity: 6" x 6" x 1/2" at 90°
  • Rectangle notcher 3" x 5-3/4" x 1/2"
  • Notcher table with guides
  • 220-ton, 24" flat bar shear with sabre blade
  • Shear table with miter fence
  • Tool table work area
  • Slug receptacles
  • Electrical box supplied with emergency palm button and lock-out tag-out accommodations
  • 230/460 volt / 3-ph electrics (must specify voltage)
  • All guards necessary to comply with ANSI B 11-5 standards
  • Forklift accommodations
  • Warranty: Three Years
  • Made in the USA
  • 12" Throat Depth

CAPACITIES & SPECIFICATIONS

Rated on:65,000 PSI TensileA 36 Mild Steel
Punching Capacity135 ton
1-11/16" in 1" 		122 mt
43 mm in 25 mm
Special Tooling4" Max. Dia. 100 mm Max. Dia.
Throat Depth12" 300 mm
Flat Bar Shear
(sabre blade-std.)		220 ton, 24" Length
1" x 12"
3/4" x 20"
1/2" x 24" 		600 mm
25 x 300 mm
18 x 500 mm
12 x 600 mm
Angle Shear 90°
Angle Shear 45°
(with Bar Shear)		6" x 6" x 1/2"
3" x 3" x 3/8"
4" x 4" x 1/2" 		150 x 150 x 12 mm
75 x 75 x 10 mm
100 x 100 x 12 mm
Brake 12"
Brake 24"		90 ton
70 ton 		81.6 mt
63.5 mt
Open End BrakeMax. 1/4" x 6"
Flat or Angle Iron		6 mm x 150 mm
Pipe Notcher
Schedule 40		3/4"
1"
1-1/4"
1-1/2"
2" 		19 mm
25 mm
32 mm
38 mm
50 mm
90° V-Notcher6" x 6" x 5/16" 150 mm x 150 mm x 8 mm
Rectangle Notcher3" x 5-3/4" x 1/2" 75 mm x 145 mm x 12 mm
V-Notch3" x 3" x 1/2" 75 mm x 75 mm x 12 mm
Notching in Leg of Channel6" to 10" 150 mm to 250 mm
Channel Shear2" to 6" adj. 50 mm to 150 mm
Rod Shear
Round Rod (Max.)
Square Rod (Max.)
1/4" to 1-1/4", 9 Cavity
1/4" to 1", 1 Cavity
6 mm to 32 mm
6 mm to 25 mm
Square Tube Shear1/2" to 2"
12 gauge 		12 mm to 50 mm
2.75 mm
Picket Tool1/2"
3/4"
1"
16 gauge 		12 mm
19 mm
25 mm
1.6 mm
Offset Die HolderMax. 40 ton Max. 36 mt
Strokes per minute in light material1/4" stroke [Punch Station]20 spm
Strokes per minute in heavy material3/4" stroke [Punch Station]11 spm
Hydraulics3,500 psi 241 bar
Motor Standard10 hp 3 ph
230/460
208/380/575		7.46 kW

Motor Optional10 hp 1 ph
230v		7.46 kW
DimensionsW-34"
L-77-1/4"
H-74 1/4" 		119 cm
174 cm
187 cm
Weight6,200 lbs. 2,812 kg