 |
 |
|
|
|
|
Print Machine Specs
Standard Features
- 50 Ton Punch Station with 3-Station Revolving Turret (1-1/4" in 1/2")
- Keyed Punch Ram for Safety
- 4" Throat Depth
- Three 2" Die Holders, Three Punch Nuts with Wrench and Three Strippers
- One Round Punch & Die: Max. Dia. 1"
- Adjustable Stroke Control
- Angle Shear 4" x 4" x 3/8" at 90° and
2" x 2" x 3/8" at 45° - 14" Flat Bar Shear with 4-Way Reversible
Blade (3/4" x 4", 1/2" x 8", 3/8" x 10",
1/4" x 14") - Rectangular Notcher, 2-1/2" x 3" x 5/16" ,
2-1/2" x 2-3/4" x 3/8" - Tool Table Work Area
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230/460 volt /3 Phase Electrics (must specify voltage)
- All Guards Necessary to Comply with
ANSI B 11-5 Standards - Forklift Accommodations
- Warranty: Three Years
- Made in USA
Capacities & Specifications
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel | | Punching Capacity | 50 ton
1-1/4" in 1/2"
13/16" in 3/4" | 45 mt
32 mm in 12 mm
21 mm in 18 mm | | Special Tooling | 2-1/4" Max. Dia. | 57 mm Max. Dia. | | Throat Depth | 4" | 100 mm | | Flat Bar Shear | 14" Length
3/4" x 4"
1/2" x 8"
3/8" x 10"
1/4" x 14" | 350 mm
18 mm x 100 mm
12 mm x 200 mm
10 mm x 250 mm
6 mm x 350 mm | | Opt. Saber Blade | 3/4" x 4"
1/2" x 10"
3/8" x 12"
1/4" x 14" | 18 mm x 100 mm
12 mm x 250 mm
10 mm x 300 mm
6 mm x 350 mm | | Angle Shear 90° | 4" x 4" x 3/8" | 100 mm x 100 mm x 10 mm | | Angle Shear 45° | 2" x 2" x 3/8" | 50 mm x 50 mm x 10 mm | | Brake 8" | 25 ton | 23 mt | | Brake 12" | 25 ton | 23 mt | | Open End Brake | Max. 1/4" x 3"
Flat or Angle Iron | (6 x 76 mm) | Pipe Notcher
Schedule 40 I.D. | 3/4"
1"
1-1/4"
1-1/2"
2" | 19 mm
25 mm
32 mm
38 mm
50 mm | | Rectangle Notcher | 2-1/2" x 3" x 5/16"
2-1/2" x 2-3/4" x 3/8" | 62 mm x 75 mm x 8 mm
62 mm x 69 mm x 10 mm | 90° V. Notcher
| 6" x 6" x 1/8"
3" x 3" x 1/4" | 150 mm x 150 mm x 3 mm
75 mm x 75 mm x 6 mm | Rod Shear
Round Rod (Max.)
Square Rod (Max.) |
1/4" to 1", 5 Cav.
1/4" to 3/4", 1 Cav. |
6 mm to 25 mm
6 mm to 18 mm | | Square Tube Shear | 1/2" to 1"
12 ga. | 12 mm to 25 mm
2.75 mm | | Picket Tool | 1/2"
3/4"
1"
16 gauge | 12 mm
19 mm
25 mm
1.6 mm | | Strokes Per Minute in Light Material [Punch Station] | 1/4" stroke | 40 spm | | Strokes Per Minute in Heavy Material [Punch Station] | 3/4" stroke | 17 spm | | Hydraulics | 2100 psi | 145 bar | | Motors Standard | 3 hp 3 ph
230/460
208/380/575 | 2.24 kW
| | Motors Optional | 5 hp 1 ph
220v | 3.73 kW
| | Dimensions | W-29"
L-48"
H-67" | W-74 cm
L-122 cm
H-170 cm | | Weight | 1,575 lbs. | 715 kg |
|
|
|
|
|
