Component Tooling
Porta Fab 45
50514 CM
5014 TM
6509-24M
9012-24M
12012-24M
Fully Integrated
FI 8510-20M
DO 8514-20M
ShearMaster 610
Dual Operator
DO 70/110-24M
DO 8514-20M
DO 95/140-24M
DO 120/200-24M
DO 135/220-24M
DO 150/240-24M
Programmable Stop
In-Stock Punches & Dies
Special Tooling & Options
Special Punches and Dies
Conveyors
Optional Standard Tooling
Print Machine Specs
Standard Features
90 Ton Punch Station (1-1/8" in 1")
Keyed Punch Ram for Safety
12" Throat Depth
Punch Gauging Table with Fence and Scale
Die Holder Complete with 2" Die Insert
Punch Nut with Wrench & Stripper
One Round Punch & Die: Max. Dia. 1-1/4"
Punch Jog Control
Adjustable Electric Stroke Control with Scale
Electric Remote Foot Pedal
Angle Shear Capacity 6" x 6" x 1/2" at 90°
24" Flat Bar Shear with 4-Way Reversible
Blade (1" x 8", 1/4" x 24")
Shear Table with Miter Fence
Tool Table Work Area
Two-Stage Hydraulic Pump
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/460 volt /3 Phase Electrics (must specify voltage)
All Guards Necessary to Comply with
ANSI B 11-5 Standards
Forklift Accommodations
Warranty: Three Years
Made in USA
Capacities & Specifications
Rated on:
65,000 PSI Tensile
A 36 Mild Steel
Punching Capacity
90 ton
1-1/8" in 1"
80 mt
27 mm in 25 mm
Special Tooling
4" Max. Dia.
100 Max. Dia.
Throat Depth
12"
300 mm
Flat Bar Shear
24" Length
1" x 8"
3/4" x 12"
1/2" x 16"
1/4" x 24"
600 mm
25 mm x 200 mm
18 mmx 300 mm
12 mm x 400 mm
6 mm x 600 mm
Opt. Saber Blade
1/2" x 22"
3/8" x 24"
12 mm x 550 mm
10 mm x 600 mm
Angle Shear 90°
6" x 6" x 1/2"
150 mm x 150 mm x 12 mm
Angle Shear 45°
(with Bar Shear)
3" x 3" x 3/8"
4" x 4" x 1/2"
75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm
Brake 12"
50 ton
45 mt
Brake 24"
40 ton
36 mt
Open End Brake
Max. 1/4" x 6"
Flat or Angle Iron
6 mm x 150 mm
Pipe Notcher Schedule 40 I.D.
3/4"
1"
1-1/4"
1-1/2"
2"
20 mm
25 mm
32 mm
38 mm
50 mm
Rectangle Notcher
2" x 2-1/2" x 3/8"
50 mm x 65 mm x 10 mm
90° V. Notcher
6" x 6" x 5/16"
150 mm x 150 mm x 8 mm
Channel Shear
2" to 6" Adj.
50 mm to 150 mm Adj.
Rod Shear
Round Rod
Square Rod
1/4" to 1-1/4",
9 Cav.
1/4" to 1",
1 Cav.
6 mm to 32 mm
6 mm to 25 mm
Square Tube Shear
1/2" to 2"
12 ga.
12 mm to 50 mm
2.75 mm
Picket Tool
1/2"
3/4"
1"
16 ga.
12 mm
19 mm
25 mm
1.6 mm
Offset Die Holder
Max. 40 ton
Max. 36 mt
Strokes Per Minute in Light Material
1/4" Stroke [Punch Station]
37 spm
Strokes Per Minute in Heavy Material
3/4" Stroke [Punch Station]
24 spm
Hydraulics
2,600 psi
183 bar
Motors Standard
5 hp 3 ph
230/240
208/380/575
3.73 kW
Motors Optional
5 hp 1ph
230v
3.73 kW
Dimensions
W-26"
L-76"
H-70"
W-66 cm
L-193 cm
H-177 cm
Weight
3,900 lbs.
1,770 kg
Porta-Fab 45
50514-CM
5014-TM
6509-24M
12012-24M
ShearMaster 610
IMTS 2010 ~ September 13-18
