 |
 |
|
|
|
|
Print Machine Specs
Standard Features
- Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
- 85 Ton Punch Station (1-1/16" in 1")
- Keyed Punch Ram for Safety
- 14" Throat Depth
- Punch Gauging Table with Fence and Scale
- Die Holder Complete with 2" Die Insert
for #82 Dies, Punch Nut with Wrench
- Adjustable Swing-Away Stripper
- One Round Punch & Die: Max. Dia. 1-1/4"
- Punch Jog Control
- Two Adjustable Electric Stroke Controls with Scale
- Two Electric Remote Foot Pedals
- Two 2-Stage Hydraulic Pumps
- Two Valves
- 6" x 6" x 1/2" Slug-less Angle Shear
- Built-In Rectangle Notcher: 2" x 4" x 1/2" can be converted to 3" x 3" V-Notcher, 50-Ton Punch Station, and 6" Open End Brake
- 20" Flat Bar Shear with 4-Way Reversible
Blade (1" x 16", 3/4" x 20")
- Shear Table with Miter Fence
- Rod Shear: 1/2", 3/4", 1", 1-1/2" Round
and 1-1/2" Square
- Slug Receptacles
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230 or 460 Volt /3 ph Electrics
- All Guards Necessary to Comply withANSI B 11-5 Standards
- Forklift Accommodations
- Warranty: Three Years
- Made in USA
Capacities & Specifications
Punching Capacity
| 85 ton
1-1/16" in 1" | 77 mt
27 mm in 25 mm | | Special Tooling | 4" Max. Dia. | 200 mm Max. Di. | | Throat Depth | 14" | 350 mm | Flat Bar Shear
| 20" Length
1" x 16"
3/4" x 20" | 500 mm
25 mm x 400 mm
19 mm x 500 mm | | Angle Shear 90° | 6" x 6" x 1/2" | 150 mm x 150 mm x 13 mm | | Angle Shear 45° | 4" x 4" x 1/2" | 100 mm x 100 mm x 13 mm | | Brake 12" | 85 ton | 77 mt | | Brake 24" | 85 ton | 77 mt | | Open End Brake | 6" x 5/8" | 150 mm x 16 mm | Pipe Notcher
Schedule 40 I.D. | 3/4"
1",
1-1/4"
1-1/2"
2" | 19 mm
25 mm
32 mm
38 mm
50 mm | | 90° V. Notcher (Punch Station) | 6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm | | Rectangle Notcher | 2" x 4" x 1/2" | 50 mm x 100 mm x 13 mm | 90° V-Nother
(Notcher Station) | 3" x 3" x 1/2" | 75 mm x 75 mm x 12 mm | | Channel Shear | 2" to 6" | 50 mm to 150 mm | Rod Shear
Round Rod
Square Rod |
1/2"
3/4"
1"
1-1/2"
1-1/2" |
13 mm
19 mm
25 mm
38 mm
38 mm | Square Tube Shear
| 1/2" to 2"
14 ga. | 12 mm to 50 mm
| Picket Tool
| 1/2"
3/4"
1" | 13 mm
19 mm
25 mm | | Offset Die Holder | Max. 40 ton | 36 mt | | Strokes per Minute in
Light Material | 1/4" Stroke [Punch Station] | 48 spm | | Strokes Per Minute in
Heavy Material | 3/4" Stroke [Punch Station] | 20 spm | | Hydraulics | 3,200/3800 psi | 220/260 bar | Motors Standard
| 10 hp 3 ph
230/460
208/380/575 | 7.46 kW
| Motor Optional
| 10 hp 1 ph
230v | 7.46 kW
| Dimensions
| W-30"
L-70"
H-77" | W-750 cm
L-1500 cm
H-1925 cm | | Weight | 5,400 lbs | 2455 kg | | Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
|
|
|
|
|
