Standard Features

• Rigid Column Design
• Hydraulic Operated Vise with Anti-Burr Device
• Hydraulic Operated Power Down Feed
• Hydraulic -Operated Feed Pressure Reducing Valve
• Head Miters 45 degrees
• Two Cutting Speeds:
  LT (Low Turn) =15 RPM and 30 RPM or
  HT (High Turn) = 30 RPM & 60 RPM
• Electric Limit Switches for Stroke Setting
• Electric Foot Pedal
• Emergency Stop Button
• Steel Stand
• Five Gallon Coolant System with Chip Collection Tray
• Way Lubrication System
• One 12-1/2" diameter (315 mm) High Speed Steel Blade
• One Blade Wrench
• One Gallon Concentrated Coolant
• 230 or 460 Volt /3 Phase Electrics (must specify voltage)
• Two-Year Warranty (Parts Only)
  Exception: One-year Warranty on Hydraulic & Electrical Parts
• Made in USA

Capacities & Specifications