 |
 |
|
|
|
|
Print Machine Specs
Standard Features
- Dual operator allows for two operators to work at the same time at full capacity
- 135-ton punch station (1-11/16" in 1")
- Keyed punch ram for safety
- Punch gauging table with fence and scale
- Die holders: 2", 2-1/2", and 3"
- Punch nut with wrench
- Adjustable swing-away stripper
- One round punch & die: max. diameter 1-1/4"
- Punch jog control
- Two electric remote foot pedals
- Two adjustable electric stroke controls with scale
- Two hydraulic pumps
- Two valves
- Angle shear capacity: 6" x 6" x 1/2" at 90°
- Rectangle notcher 3" x 5-3/4" x 1/2"
- Notcher table with guides
- 220-ton, 24" flat bar shear with sabre blade
- Shear table with miter fence
- Tool table work area
- Slug receptacles
- Electrical box supplied with emergency palm button and lock-out tag-out accommodations
- 230/460 volt / 3-ph electrics (must specify voltage)
- All guards necessary to comply with ANSI B 11-5 standards
- Forklift accommodations
- One-year warranty
- Made in the USA
Capacities & Specifications
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel | | Punching Capacity | 135 ton
1-11/16" in 1" | 122 mt
43 mm in 25 mm | | Special Tooling | 4" Max. Dia. | 100 mm Max. Dia. | | Throat Depth | 12" | 300 mm | Flat Bar Shear
(sabre blade-std.) | 220 ton, 24" Length
1" x 12"
3/4" x 20"
1/2" x 24" | 600 mm
25 x 300 mm
18 x 500 mm
12 x 600 mm
| Angle Shear 90°
Angle Shear 45°
(with Bar Shear) | 6" x 6" x 1/2"
3" x 3" x 3/8"
4" x 4" x 1/2" | 150 x 150 x 12 mm
75 x 75 x 10 mm
100 x 100 x 12 mm
| Brake 12"
Brake 24" | 90 ton
70 ton | 81.6 mt
63.5 mt
| | Open End Brake | Max. 1/4" x 6" Flat or
Angle Iron | 6 mm x 150 mm | Pipe Notcher
Schedule 40 | 3/4"
1"
1-1/4"
1-1/2"
2" | 19 mm
25 mm
32 mm
38 mm
50 mm
| | 90° V-Notcher | 6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm | | Rectangle Notcher | 3" x 5-3/4" x 1/2" | 75 mm x 145 mm x 12 mm | | V-Notch | 3" x 3" x 1/2" | 75 mm x 75 mm x 12 mm | | Notching in Leg of Channel | 6" to 10" | 150 mm to 250 mm | | Channel Shear | 2" to 6" adj. | 50 mm to 150 mm | Rod Shear
Round Rod (Max.)
Square Rod (Max.) |
1/4" to 1-1/4", 9 Cavity
1/4" to 1", 1 Cavity |
6 mm to 32 mm
6 mm to 25 mm | | Square Tube Shear | 1/2" to 2"
12 gauge | 12 mm to 50 mm
2.75 mm | | Picket Tool | 1/2"
3/4"
1"
16 gauge | 12 mm
19 mm
25 mm
1.6 mm | | Offset Die Holder | Max. 40 ton | Max. 36 mt | | Strokes per minute in light material | 1/4" stroke [Punch Station] | 20 spm | | Strokes per minute in heavy material | 3/4" stroke [Punch Station] | 11 spm | | Hydraulics | 3,500 psi | 241 bar | | Motor Standard | 10 hp 3 ph
230/460
208/380/575 | 7.46 kW
| | Motor Optional | 10 hp 1 ph
230 v | 7.46 kW
| | Dimensions | W-34"
L-77-1/4"
H-74 1/4" | 119 cm
174 cm
187 cm | | Weight | 6,200 lbs. | 2,812 kg |
|
|
|
|
|
