play
Contact Us
"Scotchman has exceeded my every expectation. Durability, customer service, and quality are superb. Homegrown business making machines in the U.S.A."
Andrew Petty | Petty Welding
Contact Customer Service

Tooling for Ironworkers

Ironworker Tools & Accessories

Scotchman ironworkers and tooling are designed & engineered in the USA and built tough providing you the versatility, dependable performance and customer satisfaction you expect from Scotchman. Our ironworkers can utilize a variety of optional tools and accessories that can help you save both time and money.

Punch & Dies

Scotchman offers a full line of punches & dies for our Ironworkers. All shaped punches are keyed standard for safe & positive punch alignment.

Shapes include round, round offset, metric, oval, square, corner turning, hexagon, picket, and trimming and cut-off.

Scotchman Industries has hundreds of punches and dies available in-stock for every model. If you cannot find a product that meets your needs, we can design and manufacture a custom shape.

Price Sheets

To view a price list of in-stock punches & dies,
select the pdf for your model below.

Punch & Dies for:

Porta Fab 45

50514 EC

5014 ET

Older models:
207, 314, 424, 314C6, 314T,
4014C, 4014T, 4014CM, 4014TM,
5014CM, 5014TM, 50514CM

Punch & Dies for:

6509

9012

12012

FI 8510

DO 8514

DO 70

DO 95

DO 120

DO 135

DO 150

Older models:
5075, 6012, 7012, 7575, 9075, 2450,
FI 5009, FI 5109, FI 6008, FI 8507,DO 100

How-To Videos

STANDARD vs. OFFEST Die

Learn the difference between a STANDARD and an OFFSET die for your Scotchman Ironworker. (Shown on a 50514-EC)
YouTube

Proper Installation of a STANDARD Punch & Die

Learn How to properly install & align a punch & a STANDARD die on a Scotchman ironworker.
NOTE: Proper alignment of your punch & die  is crucial to your safety and those around you. NEVER punch material thicker than the diameter of your punch.
(Shown on model 50514-EC)
YouTube

Proper Installation of an Offset Punch & Die

Learn how to properly install & align a punch with an OFFSET die on a Scotchman Ironworker.
NOTE: Proper alignment of your punch & die  is crucial to your safety and those around you. NEVER punch material thicker than the diameter of your punch.
(Shown on model 50514-EC)
YouTube

Snap Ring Removal Tool

Learn the easiest way to remove a snap ring from a Scotchman punch. Tool is made for a #20 style punch & die and is available for purchase.
YouTube

ASSEMBLY OF A #40 PUNCH & DIE TOOL TABLE W/STORAGE DRAWER

Step-by-step directions to aid in assembling your new punch & die storage drawer for Scotchman's #40 tool table extension.
Follow along with paper manual for detailed instructions & images.
YouTube 

Assembly of a #20 Punch & Die Tool Table w/Storage Drawer

Step-by-step directions to aid in assembling your new punch & die storage drawer for Scotchman's #20 tool table extension.
Follow along with paper manual for detailed instructions & images.
YouTube

Tooling & Accessories

50514 EC tricked out ironworker at show

Scotchman has a wide variety of in-stock tooling options and accessories to customize your ironworker to fit your needs. Plus, every piece of Scotchman tooling is designed & built at our factory.

Porta Fab 45
optional
Snap Ring Removal Tool
Easily remove the snap rings on our punches with this tool. (For style #20 punches)
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
8” Brake
Delivers 25-tons of force to bend and shape metals up to 8 inches wide. 2" Lower V-die.
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
LED Lights
The LED Light Package for the punch station of the Porta-Fab 45 makes sure you can always see what you are working on. This is a factory installed option only.
View
optional
Brake Table with Scale and Squaring Arm
Adding this option to the 12" brake tool increases precision & accuracy. Length Gauge w/Scale is sold separately. (For 12" brake only)
View
optional
Square Tube Shear
Can shear 1/2" to 1" square tube, up to 14 gauge.
View
optional
30" Material Stop
Back Gauge for 3-in-1 Tool
View
optional
Rod Shear
This tool has 5 cavities for round rod: 1/4" to 1", and 1 cavity for square rod: 1/4" to 3/4"
View
optional
90° V-Notcher
Can cut a 6" x 6" V-notch in 1/8" thick material, and a 3" x 3" V-notch in 1/4" material. For tool table work station only.
View
optional
Open End Brake
Max 1/4" x 3" Flat or Angle Iron. *use on tool table station only
View
optional
12" Brake
Delivers 25-tons of force to bend and shape metals up to 12 inches wide. 2" Lower V-die.
View
optional
6" Brake
4-way lower V-die, 6 inch length.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets, plus Snap Ring Removal Tool - Style #20 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package, plus Snap Ring Removal Tool - Style #20. Includes: Round, Square & Oval sets
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
optional
Rectangle Notcher
Convert the punch station into a rectangle notcher- 2" x 1-3/4" x 1/4" capacity
View
50514-EC
optional
Snap Ring Removal Tool
Easily remove the snap rings on our punches with this tool. (For style #20 punches)
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
8” Brake
Delivers 25-tons of force to bend and shape metals up to 8 inches wide. 2" Lower V-die.
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Jog Control
This manual motor jog control allows the operator to 'jog' the machine to a certain position so specific adjustments or precise functions can be made.
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to 5014-ET
View
optional
Brake Table with Scale and Squaring Arm
Adding this option to the 12" brake tool increases precision & accuracy. Length Gauge w/Scale is sold separately. (For 12" brake only)
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
Shear Table with Miter Fence
Allows for accurate and repeatable cuts at the bar shear station.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
Punch Gauging Table with Fence & Scale
Allows for accurate and repeatable hole punching. Mounts to the punch station of a 50514-EC..
View
optional
Square Tube Shear
Can shear 1/2" to 1" square tube, up to 14 gauge.
View
optional
Rod Shear
This tool has 5 cavities for round rod: 1/4" to 1", and 1 cavity for square rod: 1/4" to 3/4"
View
optional
90° V-Notcher
Can cut a 6" x 6" V-notch in 1/8" thick material, and a 3" x 3" V-notch in 1/4" material. For tool table work station only.
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 3" Flat or Angle Iron. *use on tool table station only
View
optional
12" Brake
Delivers 25-tons of force to bend and shape metals up to 12 inches wide. 2" Lower V-die.
View
optional
6" Brake
4-way lower V-die, 6 inch length.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets, plus Snap Ring Removal Tool - Style #20 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package, plus Snap Ring Removal Tool - Style #20. Includes: Round, Square & Oval sets
View
optional
Stop/Pusher Measuring System for 50514-EC Ironworker
Automate your punch station by adding a Programmable Stop/Pusher Material
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
optional
LED Lights
Now a standard feature! Our LED Work Lights for model 50514-EC ironworker is installed on the punch, shear & notcher stations to makes sure you can always see what you are working on.
View
5014-ET
optional
Snap Ring Removal Tool
Easily remove the snap rings on our punches with this tool. (For style #20 punches)
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
8” Brake
Delivers 25-tons of force to bend and shape metals up to 8 inches wide. 2" Lower V-die.
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Jog Control
This manual motor jog control allows the operator to 'jog' the machine to a certain position so specific adjustments or precise functions can be made.
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to 5014-ET
View
optional
Brake Table with Scale and Squaring Arm
Adding this option to the 12" brake tool increases precision & accuracy. Length Gauge w/Scale is sold separately. (For 12" brake only)
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
Shear Table with Miter Fence
Allows for accurate and repeatable cuts at the bar shear station.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
Punch Gauging Table with Fence & Scale
Allows for accurate and repeatable hole punching. Mounts to the punch station of a 5014-ET.
View
optional
Square Tube Shear
Can shear 1/2" to 1" square tube, up to 14 gauge.
View
optional
Rod Shear
This tool has 5 cavities for round rod: 1/4" to 1", and 1 cavity for square rod: 1/4" to 3/4"
View
optional
90° V-Notcher
Can cut a 6" x 6" V-notch in 1/8" thick material, and a 3" x 3" V-notch in 1/4" material. For tool table work station only.
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 3" Flat or Angle Iron. *use on tool table station only
View
optional
12" Brake
Delivers 25-tons of force to bend and shape metals up to 12 inches wide. 2" Lower V-die.
View
optional
6" Brake
4-way lower V-die, 6 inch length.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets, plus Snap Ring Removal Tool - Style #20 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package, plus Snap Ring Removal Tool - Style #20. Includes: Round, Square & Oval sets
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
optional
LED Lights
Now a standard feature! Our LED Work Lights for model 5014-ET ironworker are installed on the punch & shear stations to make sure you can always see what you are working on.
View
6509
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Hydraulic Hold Down
Hydraulic hold down for flat bar shear
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Rectangle Notcher
Convert the punch station into a rectangle notcher - 2" x 2-1/2" x 3/8" capacity
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
optional
LED Lights
Now a standard feature! Our LED Work Lights are installed on the punch & shear stations to make sure you can always see what you are working on.
View
DO70
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
FI85
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Roller Conveyor with Angle Iron Support
24" x 5' Roller Conveyor with Angle Iron Support attached to FI8510/20M
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Hydraulic Hold Down
Hydraulic hold down for flat bar shear
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Convert the punch station into a 90° V-Notcher. 6" x 6" x 5/16" capacity in punch station.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
DO85
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Roller Conveyor with Angle Iron Support
24" x 5' Roller Conveyor with Angle Iron Support attached to FI8510/20M
View
optional
Open End Brake For Notcher Station
Convert the built-in notcher station into an open end brake.
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Optional Punch for Notcher Station
Convert the DO85 notcher station into a second punching station.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear Blades
2", 3", 4", 5" & 6" blades available
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Convert the built-in square notcher station into a 90° V-Notcher = 3" x 3" x 1/2" capacity. Use in Vee Notcher in the punch station = 6" x 6" x 5/16" capacity.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
9012
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Hydraulic Hold Down
Hydraulic hold down for flat bar shear
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Rectangle Notcher
Convert the punch station into a rectangle notcher - 2" x 2-1/2" x 3/8" capacity
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
DO95
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
12012
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Hydraulic Hold Down
Hydraulic hold down for flat bar shear
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Rectangle Notcher
Convert the punch station into a rectangle notcher - 2" x 2-1/2" x 3/8" capacity
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
DO120
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Hydraulic Hold Down
Hydraulic hold down for flat bar shear
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
DO135
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Hydraulic Hold Down
Hydraulic hold down for flat bar shear
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
DO150
optional
Rod Shear
This tool has 9 cavities for round rod: 1/4" to 1-1/4", and 1 cavity for square rod: 1/4" to 1""
View
optional
Pipe Notcher
Produce the perfect gap-free notch in seconds. Tool can be used in both the tool table or punch station on most models. Requires Schedule 40 pipe notcher die sets. Available standard sizes: 3/4", 1", 1-1/4", 1-1/2" or 2"
View
optional
Picket Tool
The picket punch tool is used to make pickets in ornamental iron. It flattens & trims ½”, ¾” or 1” thin gauge, hallow wall, square tubing. Separate dies needed for each size.
View
optional
Unistrut Shear
Tool will shear Unistrut without distortion
View
optional
Weld Coupon Bender
This tool is designed to bend welded coupons to show a welding instructor and student if there are weak points in the weld.
View
optional
Tool Table Extension With Punch & Die Storage Drawer
Store your frequently tools here with quick sliding access to the tool table work station. *Punches & Dies sold separately.
View
optional
Punch Table Extension
Increase the work area on the punch station with this extension table.
View
optional
Custom Built Tool examples
Examples of applications that our custom tooling department can build. Contact us to design custom tools built to your unique specifications.
View
optional
24" x 5' Conveyor with Angle Iron Support
24" x 5' Conveyor with Angle Iron Support attached to DO70
View
optional
Multi-Loc Punch Gauging Table
Multi-Loc Punch Gauging Table comes in two sizes:36" & 85" Extensions. This unique measuring system allows you to set metal stops at various lengths to enable the maximization of raw stock without changing the set-up each time.
View
optional
Brake Table with Scale & Squaring Arm
Increase precision & accuracy while using the brake with this option. Length Gauge w/Scale is sold separately. (For 12" & 24” brakes)
View
optional
Hydraulic Hold Down
Hydraulic hold down for flat bar shear
View
optional
Unequal Leg Angle Shear Blades
Unequal Leg Blades for your angle shear. Available in 66°, 70°, 74° or 80°.
View
optional
Offset Die Holder
Offset Die Holder allows for punching in the flange of channel or I-beam. (Stripper required for 6509 & 9012 models)
View
optional
Urethane Stripper
Aids in the removal of material being punched and minimizes deformation of material from the punch station.
View
optional
Channel Shear
Shears channel iron distortion free from 2" to 6" (Adjustable)
View
optional
12" Brake
Bend and shape metal up to 12 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Laser Light - Bar Shear
Easily see the cut mark & Increases precision at the bar shear.
View
optional
48" Back Gauge
Make consistent & repeatable cuts an the bar shear using a Back Gauge tool.  (Available in Manual or Electric versions)
View
optional
90° V-Notcher
Can cut 6" x 6" V-notch in 5/16" thick material. For punch station or tool table work station.
View
optional
Angle Shear Miter Guide
45-degree & 22-degree miter guide for angle iron shear.
View
optional
Open End Brake
Max 1/4" x 5" Flat or Angle Iron *use on punch station only.
View
optional
Economy Punch & Die Package
12 Round Punch & Die Sets - Style #40 & #82 (available in 16th, 32nd OR metric sizes)
View
optional
Deluxe Punch & Die Package
Punch & Die Variety Package - Style #40 & #82. Includes: Round, Square & Oval sets.
View
optional
24" Brake
Bend and shape metal up to 24 inches wide. Comes standard with 2" Lower V-dies. *Brake table & back gauge sold separately.
View
optional
Square Tube Shear
Can shear 1/2" to 2" square tube, up to 14 gauge.
View
optional
Brake Length Gauge with Scale
Brake Length Gauge with Scale attaches to an 8", 12", or 24" Brake.
View
ShearMaster 610
optional
24" x 5' Roller Conveyor
24" x 5' Roller Conveyor attached to ShearMaster 610
View

Custom-Built Tooling

Custom-Tooling-examples

Sometimes, a unique application requires a custom-built solution.

If you need something beyond the standard tooling we offer, our team of engineers is equipped to design and build a tailored solution built to your specifications.

From our plant in Philip, South Dakota, each step of this process from design & development to completion is done in-house. We thoroughly test each tool to verify performance and ensure value for your investment. With quality manufactured into every tool, we assure that our tools will stand up to the tough demands of your applications.


Send us your prints and our engineers will get to work designing a custom tool for your specific needs.