Products > Saws > Cold Saw > CPO 350 NF PKPD

CPO 350 NF PKPD

Semi-automatic cold saw built for cutting small to medium diameter aluminum, plastic, copper and nonferrous metals without heat or sparks. Air-operated material vise and pneumatic power down feed.

CPO 350 NF PKPD

Semi-automatic cold saw built for cutting small to medium diameter aluminum, plastic, copper and nonferrous metals without heat or sparks. Air-operated material vise and pneumatic power down feed.

Own It For As Low As

$368 / month

lease-purchase financing available

CPO 350 NF PKPD

DescriptionOpen

The Scotchman CPO350 NF PKPD semi-automatic coldsaw is built for industrial use and designed to make precise burr-free cuts on a production scale through non-ferrous metals like aluminum, copper & plastic.

This wet saw accepts up to a 14" (350mm) carbide tipped saw blade and can easily cut 4.5” OD round tube and 3” solid at 90°; plus, it has mitering capabilities of 180° with a miter locking device allowing for quick & accurate stop setting at 45°, 90° and 135°. This saw can also slot and notch, and with accuracy within 1 degree of mitering and a squareness tolerance of ±0.002 per diameter inch in height, the real payoff for this machine is fast, clean, and very precise cuts.

The semi-auto cycle is simple to operate with a press on the remote foot pedal and features a double clamping and self-centering vise for maximum material hold. Its pneumatic vise and automatic return save you time, and the integrated mist coolant system maintains a high cut quality while extending the life of the blade saving you money.

All Scotchman CPO series saws are American-made, built with a rigid cast iron saw base, and have a double reduction ground and hardened all-metal gear box to ensure tight tolerances throughout the life of the saw. The CPO 350NF PKPD is built with dependability and versatility in mind and is able to expand to meet growing production needs by adding on a programmable stop/feed material positioning system.

This saw is backed by a 3-year warranty and lifetime technical support. Cut with confidence on a USA made sawing system from Scotchman.

Standard FeaturesOpen
  • Semi-automatic cycle
  • Air operated double self-centering vise assures burr-free cuts
  • Pneumatic power down feed with electric controls
  • Emergency stop button
  • Miter capabilities 45 degrees left to 45 degrees right
  • Miter locking device: Quick, accurate settings-stops at 45 degrees left, 90 degrees, and 45 degrees right
  • Capable of slotting
  • Positive-driven cogged belt system
  • Chip drawer
  • Mist coolant lubrication system
  • One 350 mm diameter carbide-tipped blade
  • One blade wrench
  • One gallon coolant
  • Complies with ANSI B11.10 safety standards
  • Warranty: Three years on parts
  • Made in USA
Capacities & SpecsOpen
Cutting Speed 3,000 rpm Motor Rate:
5 hp
 
Maximum Cutting Capacities
(Non-Ferrous & PVC )
TUBING

Round
Square
Rectangle
90 Degree

4-1/2" 
4-1/4" x 4-1/4" 
5-1/2" x 4" 
45 Degree

4-1/4" 
4" x 4" 
4" x 4" 
SOLID

Round
Square
90 Degree

3" 
3" x 3" 
45 Degree

2-1/2" 
2-1/2" x 2-1/2"
Motor Options (Factory Wired) Specify:
208/230/460v, 3 ph
   
Maximum Diameter Blade 350 mm    
Arbor Bore 40 mm    
Pin Spacing 4/12/64    
Width 21-7/8" 55.5 cm  
Depth 43-1/2" 110.5 cm  
Height (not including feed handle) 56-1/4" 143 cm  
Height (floor to vise) 37-7/16" 95 cm  
Shipping Weight
(may vary)
725 lbs. 329 kg  

Optional Tooling

We're here to help

Not sure where to start? We’re here to help you find the best fit for your needs — reach out anytime for expert guidance and support.