Circular cold saw

Products > Saws > Cold Saw > CPO 350 PK

14" Manual Saw with power vise for Mild Steel

Industrial cold saw built for cutting small to mediul diameter ferrous metals without heat or sparks. Air-operated material vise and operator controlled trigger switch.

CPO 350 PK

Select Option

Description
Standard Features
Capacities & Specs

If you are looking for a precision metal cutting saw, this powerful American-made Circular Cold Saw takes sawing to the next level. The CPO350 PK coldsaw is designed to make extremely fast and accurate cuts through metal and features a double clamping and self-centering vise for maximum hold and provides burr-free, high quality, volume parts.

It has 180 degree mitering ability and a miter-locking device which automatically stops at 45 degrees left, 90 degrees straight, and 45 degrees right, and can slot and notch. Accuracy within 1° of mitering and a squareness tolerance of ±0.002 per diameter inch in height, the real payoff for this machine is fast, clean and extremely accurate cuts.

Additional machine features include a chip drawer, a two-speed motor (or variable speed 11-177 rpm motor) and utilizes up to a 14" diameter (350mm) high-speed steel saw blade giving it the ability to cut 4-1/2" OD max round tube at 90° and 1-3/4" max round or square solid at 90 degrees. Features two cutting speeds (LT 30/60 rpm or HT 60/120 rpm), the CPO350PK also comes with a seven-gallon coolant tank. This dependable machine is built with versatility in mind, with the quality you expect from a Scotchman. Always backed by their 3-Year Warranty and lifetime customer support!

Pair this machine with a Scotchman digital measuring system to automate the measuring process; simply enter the desired length on the touchscreen and the stop will automatically move to the correct length.

Air operated double self-centering vise assures burr-free cuts
Operator controlled trigger switch
Miter capabilities 45 degrees left to 45 degrees right
Miter locking device: Quick, accurate settings-stops at 45 degrees left, 90 degrees, and 45 degrees right
Capable of slotting
Double reduction, hardened and ground worm and wheel gear box
Chip drawer
7 Gallon flood coolant tank with pump
One 315 mm diameter HSS blade
One blade wrench
One gallon coolant
Complies with ANSI B11.10 safety standards
Warranty: Three years on parts
Made in USA

Cutting Speeds (must specify when ordering)	LT (Low Turn) - designed for solid mild steel, solid stainless steel & thick wall pipe	LT (Low Turn) 22 / 44 rpm	Motor rate: 3 hp
	HT (High Turn) - designed for thin wall tube 0.060 wall thickness or thinner and non-ferrous material	HT (High Turn) 44 / 88 rpm	Motor rate: 3 hp
	VS (Variable Speed) ~ wired 230/460, 3-ph	VS (Var. Speed) 11 to 177 rpm	Motor Rate: 5 hp
	VS (Variable Speed) ~ wired 220, 1-ph	VS (Var. Speed) 11 to 177 rpm	Motor Rate: 5 ph
	SS (Single Speed) - designed for 220v 1ph applications	SS (One Speed) 44 rpm	Motor Rate: 3 hp
Maximum Cutting Capacities (based on mild steel)	TUBING Round Square Rectangle	90 Degree 4-1/2" 4-1/4" x 4-1/4" 5-1/2" x 4"	45 Degree 4" 3-3/4" x 3-3/4" 3-3/4" x 3-3/4"
Maximum Cutting Capacities (based on mild steel)	SOLID Round Square	90 Degree 1-3/4" 1-3/4" x 1-3/4"	45 Degree 1-1/2" 1-1/2" x 1-1/2"
Motor Options (based on mild steel) Must Specify Voltage	LT & HT: 208/230/460/575v, 3ph; OR 220v, 1ph	VS: 230/460v 3ph; 220v, 1ph	SS: 220v, 1ph
Maximum Diameter Blade	350 mm
Arbor Bore	40 mm
Pin Spacing	4/12/64
Width	21-7/8"	55.5 cm
Depth	43-1/2"	110.5 cm
Height (not including feed handle)	56-1/4"	143 cm
Height (floor to vise)	37-7/16"	95 cm
Shipping Weight (may vary)	690 lbs.	313 kg

Own It For As Low As

^$322 / month

lease-purchase financing available

REQUEST Pricing

Optional Tooling

I am VERY VERY satisfies with our purchase!! This CPO 350 saw has been flawless since we put it to use in our production line. I can believe how quite it operates too! It has been an AWESOME saw for us and we use it all day everyday to slot tube.

David Schlossberg | Synergy Mfg

San Luis Obispo, CA

I purchased this saw for one job I do routinely. I cut small 1" stainless steel parts done 8,000 at a time and need to be within plus or minus 0.005" in length. It used to take me about 20 hours to saw them all, but after altering your saw jaws so I can stack eight pieces at a time and saw them while I am doing another operation I have virtually no sawing time in them at all and they all turn out within tolerance.

Dexil Rold | Rold's Machining

Spokane, WA

We bought a 350 cold saw and it works great. Smooth, Clean cut everytime.

Jason Willberg

We have had our HFA with bundle cut dies (cut multiple tubes at once) for over nine years now. It is an excellent machine. We have only had to replace a few minor wear items on it throughout the years and down time has been basically non-existent. We were so impressed with the machine and customer service from Scotchman that when one of our manual saws went down we replaced it with a CPO 350 series saw. I have and would highly recommend Scotchman to anyone needing a quality saw. Thanks to all at Scotchman.

Keith McCracken | Mid-States Sales Inc.

Columbus, OH

Not Sure?

Here are some factors to consider
when selecting an ironworker
that works for you.

We’re Here to Help!