17 mandrel sizes available to ensure a gap-free fit.
Abrasive Belts (4")
4"
17 mandrel sizes available to ensure a gap-free fit.
| Pipe | Tube | Decimal Size | AL100U-01 & 02 Item # |
AL150/AL150-HS Item # |
Price AL100U-01 & 02 |
Price AL150/AL150-HS |
|---|---|---|---|---|---|---|
| 1/2" | 0.840 | A042.21.3 | A043.21.3 | $145.00 | $160.00 | |
| 1.000 | 1.000 | A042.26 | A043.26 | $145.00 | $160.00 | |
| 3/4" | 1.060 | A042.26.9 | A043.26.9 | $145.00 | $160.00 | |
| 1.250 | 1.250 | A042.32 | A043.32 | $185.00 | $205.00 | |
| 1" | 1.330 | A042.33.7 | A043.33.7 | $185.00 | $205.00 | |
| 1.500 | 1.500 | A042.38 | A043.38 | $190.00 | $225.00 | |
| 1-1/4" | 1.660 | A042.42.4 | A043.42.4 | $210.00 | $245.00 | |
| 1.750 | 1.750 | A042.44 | A043.44 | $210.00 | $245.00 | |
| 1-1/2" | 1.900 | A042.48.3 | A043.48.3 | $225.00 | $260.00 | |
| 2.000 | 2.000 | A042.50 | A043.50 | $225.00 | $260.00 | |
| 2" | 2.375 | A042.60.3 | A043.60.3 | $255.00 | $300.00 | |
| 2.500 | 2.500 | A042.63.5 | A043.63.5 | $315.00 | $375.00 | |
| 2-1/2" | 2.875 | A042.73.1 | A043.73.1 | $315.00 | $375.00 | |
| 3.000 | 3.000 | A042.76.1 | A043.76.1 | $325.00 | $390.00 | |
| 3" | 3.500 | A043.88.9 | $410.00 | |||
| 3.500 | 3.500 | A043.88.9 | $410.00 | |||
| 3-1/2" | 4.000 | A043.101.6 | $420.00 | |||
| 4" | 1.500 | A043.114.3 | $450.00 |
Belts for Abrasive Grinder/Notchers
*AL100U models use a 4" belt (technical data)
*AL150 models use a 6" belt (technical data)
| Item Description | Length/Grit | Qty. | Item # | Price |
|---|---|---|---|---|
| Rigid Belt for 3/4" & Larger Diameter |
4" x 78-3/4" 36 GRIT |
1 Box (10 Belts) |
A044.00001 | $285.00 |
| Flexible Belt for 3/4" & Smaller Diameter |
4" x 77-1/2" 36 GRIT |
1 Box (10 Belts) |
A044.00003 | $315.00 |
| Rigid Belt for 3/4" & Larger Diameter |
6" x 78-3/4" 36 GRIT |
1 Box (10 Belts) |
A044.00002 | $385.00 |
| Flexible Belt for 3/4" & Smaller Diameter |
6" x 77-1/2" 36 GRIT |
1 Box (10 Belts) |
A044.00004 | $395.00 |
Some additional accessory options are available. Expand to see these options by clicking on the model from the list below.
