Circular cold saw

Products > Saws > Cold Saw > CPO 350 PKPD

14" Semi-Automatic Saw for Mild Steel

Saw has an Air-operated clamp for material vise, pneumatic power down feed with electric controls & emergency stop button

CPO 350 PKPD

Select Option

Description
Standard Features
Capacities & Specs

The Scotchman CPO 350 PKPD semi-automatic cold saw is built for industrial use and designed to make precise burr-free cuts on a production scale. This American-made saw accepts a 350mm HSS blade and can easily cut 4.5” round tube and 2” solid at 90°; plus, it has mitering capabilities of 135° with a miter locking device allowing for quick & accurate stop setting at 45°, 90° and 135°. The semi-auto cycle is simple to operate with a press on the remote foot pedal and features a double clamping and self-centering vise for maximum material hold. Its pneumatic vise and automatic return save you time, and the integrated flood coolant system maintains a high cut quality while extending the life of the blade saving you money.

All Scotchman CPO series saws are American-made, built with a rigid cast iron saw base, and have a double reduction ground and hardened all-metal gear box to ensure tight tolerances throughout the life of the saw.

The CPO 350 PKPD is built with dependability and versatility in mind and is able to expand to meet growing production needs by adding on a programmable stop/feed material positioning system. This saw is backed by a 3-year parts warranty and lifetime technical support. Cut with confidence on a USA made sawing system from Scotchman.

Semi-automatic cycle
Air operated double self-centering vise assures burr-free cuts
Pneumatic power down feed with electric controls
Emergency stop button
Miter capabilities 45 degrees left to 45 degrees right
Miter locking device: Quick, accurate settings-stops at 45 degrees left, 90 degrees, and 45 degrees right
Capable of slotting
Double reduction, hardened and ground worm and wheel gear box
Chip drawer
7 Gallon flood coolant tank with pump
One 315 mm diameter HSS blade
One blade wrench
One gallon coolant
Complies with ANSI B11.10 safety standards
Warranty: Three years on parts
Made in USA

Cutting Speeds (must specify when ordering)	LT(Low Turn) - designed for solid mild steel, solid stainless steel & thick wall pipe	LT (Low Turn) 22 / 44 rpm	Motor rate: 3 hp
	HT(High Turn) - designed for thin wall tube 0.060 wall thickness or thinner and non-ferrous material	HT (HighTurn) 44 / 88 rpm	Motor rate: 3 hp
	VS (Variable Speed) ~ wired 230/460, 3-ph	VS (Variable Speed) 11 to 177 rpm	Motor Rate: 5 hp
	VS (Variable Speed) ~ wired 220, 1-ph	VS (Variable Speed) 11 to 177 rpm	Motor Rate: 5 ph
	SS (Single Speed) - designed for 220v 1ph applications	SS (Single Speed) 44 rpm	Motor Rate: 3 hp
Maximum Cutting Capacities (based on mild steel)	TUBING Round Square Rectangle	90 Degree 4-1/2" (114 mm) 4-1/4" x 4-1/4" (108 x 108 mm) 5-1/2" x 4" (140 x 102 mm)	45 Degree 4" (102 mm) 3-3/4" x 3-3/4" (95 x 95 mm) 3-3/4" x 3-3/4" (95 x 95 mm)
Maximum Cutting Capacities (based on mild steel)	SOLID Round Square	90 Degree 1-3/4" (44 mm) 1-3/4" x 1-3/4" (44 x 44 mm)	45 Degree 1-1/2" (38 mm) 1-1/2" x 1-1/2" (38 x 38 mm)
Motor Options (Factory Wired)	Specify: LT & HT: 208/230/460/575v, 3 ph; 220v, 1ph VS: 230/460v 3ph; 220v, 1ph SS: 220v, 1ph
Maximum Diameter Blade	350 mm
Arbor Bore	40 mm
Pin Spacing	4/12/64
Width	21-7/8"	55.5 cm
Depth	43-1/2"	110.5 cm
Height (not including feed handle)	56-1/4"	143 cm
Height (floor to vise)	37-7/16"	95 cm
Shipping Weight (may vary)	760 lbs.	345 kg

Own It For As Low As

^$281 / month

lease-purchase financing available

REQUEST Pricing

Optional Tooling

I purchased this saw for one job I do routinely. I cut small 1" stainless steel parts done 8,000 at a time and need to be within plus or minus 0.005" in length. It used to take me about 20 hours to saw them all, but after altering your saw jaws so I can stack eight pieces at a time and saw them while I am doing another operation I have virtually no sawing time in them at all and they all turn out within tolerance.

Dexil Rold | Rold's Machining

Spokane, WA

We bought a 350 cold saw and it works great. Smooth, Clean cut everytime.

Jason Willberg

We have had our HFA with bundle cut dies (cut multiple tubes at once) for over nine years now. It is an excellent machine. We have only had to replace a few minor wear items on it throughout the years and down time has been basically non-existent. We were so impressed with the machine and customer service from Scotchman that when one of our manual saws went down we replaced it with a CPO 350 series saw. I have and would highly recommend Scotchman to anyone needing a quality saw. Thanks to all at Scotchman.

Keith McCracken | Mid-States Sales Inc.

Columbus, OH

Great for miter cuts! Cuts are nice and clean without burrs.

Yolanda Drenner | Access Metals Inc

Not Sure?

Here are some factors to consider
when selecting an ironworker
that works for you.

We’re Here to Help!